2n3906 pnp general purpose amplifier to-92 features ? through hole package ? capable of 600mwatts of power dissipation and 200ma ic. electrical characteristics @ 25 c unless otherwise specified symbol parameter min max units off characteristics v (br)ceo collector-emitter breakdown voltage* (i c =1.0madc, i b =0) 40 vdc v (br)cbo collector-base breakdown voltage (i c =10 adc, i e =0) 40 vdc v (br)ebo emitter-base breakdown voltage (i e =10 adc, i c =0) 5.0 vdc i bl base cutoff current (v ce =30vdc, v be =3.0vdc) 50 nadc i cex collector cutoff current (v ce =30vdc, v be =3.0vdc) 50 nadc on characteristics h fe dc current gain* (i c =0.1madc, v ce =1.0vdc) (i c =1.0madc, v ce =1.0vdc) (i c =10madc, v ce =1.0vdc) (i c =50madc, v ce =1.0vdc) (i c =100madc, v ce =1.0vdc) 60 80 100 60 30 300 v ce(sat) collector-emitter saturation voltage (i c =10madc, i b =1.0madc) (i c =50madc, i b =5.0madc) 0.25 0.4 vdc v be(sat) base-emitter saturation voltage (i c =10madc, i b =1.0madc) (i c =50madc, i b =5.0madc) 0.65 0.85 0.95 vdc small-signal characteristics f t current gain-bandwidth product (i c =10madc, v ce =20vdc, f=100mhz) 250 mhz c obo output capacitance (v cb =5.0vdec, i e =0, f=100mhz) 4.5 pf c ibo input capacitance (v be =0.5vdc, i c =0, f=100khz) 10.0 pf nf noise figure (i c =100 adc, v ce =5.0vdc, r s =1.0k ? f=10hz to 15.7khz) 4.0 db switching characteristics t d delay time (v cc =3.0vdc, v be =0.5vdc 35 ns t r rise time i c =10madc, i b1 =1.0madc) 35 ns t s storage time (v cc =3.0vdc, i c =10madc 225 ns t f fall time i b1 =i b2 =1.0madc) 75 ns *pulse width 300 s, duty cycle 2.0% a e b c d g omp onents 20736 marilla street chatsworth
mcc revision: 6 2010/08/18 dimensions inches mm dim min max min max note a .170 .190 4.33 4.83 b .170 .190 4.30 4.83 c .550 .590 13.97 14.97 d .010 .020 0.36 0.56 e .130 .160 3.30 3.96 g .096 .104 2.44 2.64 tm micro commercial components cb e x case material: molded plastic. ul flammability classification rating 94v-0 x marking:type number www. mccsemi .com 1 of 5 ? lead free finish/rohs compliant ("p"suffix designates compliant. see ordering information)
2n3906 dc current gain vs collector current h fe i c (ma) 40 80 120 160 200 220 0.1 1 10 100 base-emitter on voltage vs collector current v be(on) - (v) i c - (ma) 0 0.2 0.4 0.6 0.8 1.0 1.2 0.1 1.0 10 100 collector-emitter saturation volatge vs collector current base-emitter saturation voltage vs collector current v ce(sat) - (v) v be(sat) - (v) 0 0.1 0.2 0.3 0.4 0.5 0.6 1.0 10 100 1000 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.0 10 100 1000 i c - (ma) i c - (ma) collector-base diode reverse current vs temperature common base open circuit input and output capacitance vs reverse bias voltag e i cbo - (ma) t j - ( c) volts - (v) pf 0.1 1.0 10 100 0 25 50 75 100 125 150 v cb = 20v 0 2 4 6 8 1.0 0.1 1.0 10 c obo c ibo t a = 25 c to-92 i c /i b = 10 t a = 25 c i c /i b = 10 t a = 25 c v ce = 1.0v v ce = 5.0v t a = 25 c t a = 100 c mcc revision: 6 2010/08/18 tm micro commercial components www. mccsemi .com 2 of 5
2n3906 f - (khz) maximum power dissipation vs ambient temperature noise figure vs source resistance p d(max) - (mw) t a - ( c) to-92 sot-23 0 200 400 600 800 0 50 100 150 200 nf - (db) r s - (k ? ) 0 2 4 6 8 10 12 0.1 1.0 10 100 i c = 1.0ma i c = 100 a v ce = 5.0v f = 1.0khz contours of constant gain bandwidth product (f t ) current gain v ce - (v) i c - (ma) h fe i c - (ma) v ce = 10v f = 1.0khz 0 4 8 12 16 20 24 0.1 1.0 10 100 10 100 1000 0.1 1.0 10 noise figure vs frequency switching times vs collector current nf - (db) t - (ns) i c - (ma) 1.0 10 100 1000 1.0 10 100 i b1 = i b2 = i c /10 t s t f t r t d v ce = 5.0v i c = 100 a r s = 200 ? i c = 1.0ma r s = 200 ? i c = 100 a r s = 2.0k ? 0.1 1.0 10 100 0 1 2 3 4 5 6 *100mhz increments from 100 to 700, 750 and 800mhz revision: 6 2010/08/18 tm micro commercial components mcc www. mccsemi .com 3 of 5
2n3906 input impedance output admittance h ie - (k ? ) i c - (ma) i c - (ma) h oe - ( ? ) v ce = 10v f = 1.0khz v ce = 10v f = 1.0khz 0.1 1.0 10 0.1 1.0 10 0.1 1.0 10 10 100 1000 voltage feedback ratio turn on and turn off times vs collector current h fe - (x10 - 4 ) i c - (ma) i c - (ma) t - (ns) 1.0 10 100 0.1 1.0 10 1.0 10 100 1000 1.0 10 100 t on i b1 = i c /10 v be(off) = 0.5v t off i b1 = i b2 = i c /10 t off t on mcc revision: 6 2010/08/18 tm micro commercial components www. mccsemi .com 4 of 5
mcc revision: 6 2010/08/18 tm micro commercial components www. mccsemi .com 5 of 5 ordering information device packing (part number)-ap ammo packing;2kpcs/ammobox (part number)-bp bulk;1kpcs/bag products are represented on our website, harmless against all damages. *** life support *** ***important notice*** without the expresse written approval of micro commercial components corporation. mcc's products are not authorized for use as critical components in life support devices or systems micro commercial components corp . reserve s the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . micro commercial components corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . the user of products in such applications shall assume all risks of such use and will agree to hold micro commercial components corp . and all the companies whose
|